BS EN 28092-2-1992 道路车辆.扁平快速连接终端.第2部分:单极连接器性能要求试验
作者:标准资料网
时间:2024-05-16 11:37:22
浏览:9668
来源:标准资料网
【英文标准名称】:Roadvehicles.Flat,quick-connectterminations.Testsandperformancerequirementsforsinglepoleconnections
【原文标准名称】:道路车辆.扁平快速连接终端.第2部分:单极连接器性能要求试验
【标准号】:BSEN28092-2-1992
【标准状态】:作废
【国别】:英国
【发布日期】:1992-04-01
【实施或试行日期】:
【发布单位】:英国标准学会(BSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:温升;运载工具部件;力;试验设备;抗拉强度;电压;道路车辆零部件;性能;单;机械试验;试样;压合连接器;接线端;性能试验;试验条件;电连接器
【英文主题词】:
【摘要】:
【中国标准分类号】:T36
【国际标准分类号】:43_040_10
【页数】:16P;A4
【正文语种】:英语
Product Code:SAE AMS5934
Title:Steel, Extra High Toughness, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13cr 8.0ni 2.2mo 1.1al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation-Hardenable
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope: This specification covers an extra high toughness, corrosion-resistant steel in the form of bars, wire, forgings, flash welded rings, extrusions, and stock for forging, flash welded rings, or extrusion.These products have been used typically for parts requiring extra high toughness, corrosion resistance, stress-corrosion resistance, high strength up to 600 degrees F (316 degrees C), and good ductility and strength in the transverse direction in large section sizes, but usage is not limited to such applications.Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP 1110 recommends practices to minimize such conditions.
Rationale: This specification covers an extra high toughness, corrosion-resistant steel in the form of bars, wire, forgings, flash welded rings, extrusions, and stock for forging, flash welded rings, or extrusion.These products have been used typically for parts requiring extra high toughness, corrosion resistance, stress-corrosion resistance, high strength up to 600 degrees F (316 degrees C), and good ductility and strength in the transverse direction in large section sizes, but usage is not limited to such applications.Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP 1110 recommends practices to minimize such conditions.【英文标准名称】:Railwaytransportequipment.Industrialwagons.Plugforstandard50mmaircoupling.
【原文标准名称】:铁路运输设备.工业货车.标准直径50毫米空气连接器的插塞
【标准号】:NFF36-003-1977
【标准状态】:作废
【国别】:法国
【发布日期】:1977-12-01
【实施或试行日期】:1977-11-28
【发布单位】:法国标准化协会(FR-AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:尺寸;管联接器;规范;铁道车辆;名称与符号;管道配件;标准耦合器;罐车;管塞;尺寸公差
【英文主题词】:
【摘要】:
【中国标准分类号】:S52
【国际标准分类号】:45_060_20
【页数】:2P.;A4
【正文语种】:其他