ASTM C 738-1994 从上釉陶瓷表面提取铅和镉的标准试验方法

作者:标准资料网 时间:2024-05-27 11:46:49   浏览:8255   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:StandardTestMethodforLeadandCadmiumExtractedfromGlazedCeramicSurfaces
【原文标准名称】:从上釉陶瓷表面提取铅和镉的标准试验方法
【标准号】:ASTMC738-1994
【标准状态】:现行
【国别】:美国
【发布日期】:1994
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:试验;危险物质;镉;玻璃;玻璃的;保健;陶瓷;铅;表面
【英文主题词】:surfaces;healthprotection;testing;lead;cadmium;glassed;dangerousmaterials;glass;ceramics
【摘要】:
【中国标准分类号】:Y26
【国际标准分类号】:81_060_20
【页数】:3P;A4
【正文语种】:英语


下载地址: 点击此处下载
基本信息
标准名称:低速货车 燃料消耗量限值及测量方法
英文名称:Low-speed goods vehicles—Limits and measurement methods for fuel consumption
中标分类: 车辆 >> 专用汽车 >> 农、牧、副、渔用汽车
ICS分类: 农业 >> 农业机械、工具和设备
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2008-01-21
实施日期:2008-06-01
首发日期:2008-01-21
作废日期:
主管部门:中国机械工业联合会
提出单位:中国机械工业联合会
归口单位:全国农用运输车标准化技术委员会
起草单位:机械工业农用运输车发展研究中心、国家拖拉机质量监督检验中心、山东五征集团有限公司等
起草人:张咸胜、吕树盛、郎志中、闵海涛、翁里、林连华、王侠民、薛治刚
出版社:中国标准出版社
出版日期:2008-06-01
页数:平装16开/页数:10/字数:15千字
计划单号:20051675-T-604
适用范围

本标准规定了低速货车第Ⅰ阶段燃料消耗量评价指标、燃料消耗量限值、测量条件、测量方法、测量结果重复性检验和测量数据的处理规范等。本标准适用于低速货车。

前言

没有内容

目录

没有内容

引用标准

GB7258 机动车运行安全技术条件
GB18320 农用运输车 安全技术要求
JB/T7234 四轮农用运输车 通用技术条件

所属分类: 车辆 专用汽车 农 牧 副 渔用汽车 农业 农业机械 工具和设备

MIL-HDBK-5J, DOD HANDBOOK METALLIC MATERIALS AND ELEMENTS FOR AEROSPACE VEHICLE STRUCTURES (31 JAN 2003) [S/S BY MMPDS-01] (70 MB DOWNLOAD)., This handbook is approved for use by all Departments and Agencies of the Department of Defense and the Federal Aviation Administration. This is the last planned edition of MIL-HDBK-5. MIL-HDBK- 5J is equivalent to MMPDS-01, the first edition of the Metallic Material Properties Development and Standardization Handbook, which is maintained by the Federal Aviation Administration. The FAA plans to publish annual updates and revisions to the MMPDS. As a result, MIL-HDBK-5J is scheduled to be reclassifed as noncurrent in the Spring of 2004. It will be superseded at that time by the MMPDS Handbook. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply. 3. This document contains design information on the strength properties of metallic materials and elements for aerospace vehicle structures. All information and data contained in this handbook have been coordinated with the Air Force, Army, Navy, Federal Aviation Administration, and industry prior to publication, and are being maintained as a joint effort of the Federal Aviation Administration and the Department of Defense.